FLEXANE 80 LIQUID 15800
Category:BELT REPAIR
Brand: 
FLEXANE 80 LIQUID: P/N 15800 1 LBS. (454 GR.) .06 M2. @ 0.25 IN (6.3 MM.) THICKNESS
URETHANE RUBBER LIQUID EPOXY COMPOUNDS
Use: Urethane Rubber Liquid Epoxy for making rubber part, forming molds dies & non-scratching holding fixtures & linings. Encapsulate Wire & Electronic parts from impact, vibration, expansion & contraction. *Can be drilled and machined. Note: Use blow dryer to remove air bubbles when making molded parts.
*Line or Repair Process Equipment subject to impact, vibration, expansion & contraction. *Repair Tear & Cracks in Conveyor Belts. *Use in molding fixtures. *Noise Reduction. *Specialized Repair of Voids and Cracks in Heavy Equipment
Tires *Rubber Roll Repair.
- Drying Color: Black Med. Hard Rubber.
- Working Time: 20 minutes.
- Demolding Time: 10 hours
- Full Cure: 16 hours. No Heat Required
- Mix Ratio: Mix Completely for Best Results.
- Mix Ratio By Weight: 77:23
- Working Temperature: Dry 85 °C , Wet 50 °C
- Tensile Strength: 2,100 PSI. (11.71 MPa)
- Tear Resistance: 350 PLI.
- Hardness: 87A Shore D
