ABRASION/CORROSION & WEAR REPAIR EPOXIES

*Alumina Filled Epoxy *Strong Adhesion & Wear Resistance *Protect Against Chemical Corrosion *Protect Dry Handling & Storage Machinery *Prepare Surface *Mix Properly *Apply by Troweling or Brushing
Ceramic epoxies are used to rebuild and repair damage from abrasion/corrosion and wear on pump casings, impeller blades, valves, process machinery, circulating water equipment, chutes, hoppers and equipment used in corrosive and abrasive environments. Coating this equipment extends the working life and improves performance.

Brushable Ceramic: 2 lbs. (1 Kg.) 1.0 m @ .015 in (15 mils) Thickness

P/N 11760 – Red, P/N 11765 – Blue, P/N 11700 – White (Certified safe for use with food and liquid processing equipment) Repairs: Use with new equipment or after repair of worn metal to coat & seal metal surfaces. Provides exceptional corrosion and abrasion resistance for internal surfaces of pumps, impellers, valves, heat exchangers & production equipment.
Working Time: 20 minutes.
Full Cure: 16 hours.
Recoat Time: 2-3 hours
Volume Mix Ratio: 5.6:1
Working Temperature: Dry: 155 °C , Wet: 66 °C
Adhesive Tensile Shear Strength: 2,000 PSI. (13.8 MPa)
Compressive Strength: 15,200 PSI. (104.80 MPa)
Hardness: 90 Shore D
Chemical Resistance: Excellent
Coating Thickness: 10-20 mils (.010-.020 in.)
Coverage: 1 m²

Application Notes:

Pre-Stir resin before adding hardener.
Mix hardener completely with resin.
To achieve a smooth and shiny surface brush the last coat lightly with MEK (Methyl Ethyl Ketone) before the Brushable Ceramic is completely dry.